Crossport Systems Pivio Especificaciones descargar pdf (Pagina 25)

Section Contents

3.11

BEST BY FARR

14 1/2" Closed Mouth Trailer-Mounted Bucking Unit

Technical Manual

C. HYDRAULIC CONNECTIONS

A pair of hydraulic lines - a 1-1/4” supply line and a 1” return line - connect the bucking unit to the

power unit (see illustration below). Ancillary devices (hydraulic motors, lift cylinders, etc.) are connect-

ed through the valve block illustrated below.

Perform any hydraulic connection when the power unit is not running, or when the hydraulic pump is

disengaged. The possibility of error in inter-changing the high pressure supply hose and the low pres-

sure return hose has been eliminated, because the supply side coupling is smaller than the return

side. These hose couplings are self-sealing, and care should be taken to ensure complete engage-

ment to prevent partial closure of the check valve in the coupling. Ensure that the nut (female) side is

completely made up onto the male connector - there is a line on the male fitting that indicates com-

plete make-up. Snug the female fitting right up to the line.

assembled

dis-assembled

1" INLET

1-1/4" OUTLET

Setup & Operation

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 114 115

Sin comentarios

Crossport Systems Pivio Especificaciones Pagina 25