Crossport Systems Pivio Manual de instrucciones descargar pdf (Pagina 11)

Divider Valve Operation

At the heart of every Quicklub System is the metering valve or progressive distributor block,

designed to positively meter the input of lubricant (oil up to NLGI #2 greases) out to the

connected number of lubrication points irrespective of distance and back pressure. The inlet

passageway is connected to all piston chambers at all times with only one piston free to move

at any one time.

• With all pistons at the far right, lubricant from the inlet flows against the right end of piston A (fig. 1).

• Lubricant flow shifts piston A from right to left, dispensing piston A output through connecting

passages to outlet 2. Piston A shift directs flow against right side of piston B (fig. 2).

• Lubricant flow shifts piston B from right to left, dispensing piston B output through valve ports of

piston A and through outlet 7 (fig. 3).

• Lubricant flow shifts piston C from right to left dispensing piston C output through valve ports of

piston B and through outlet 5.

• Piston C shift directs lubricant flow against right side of piston D (not illus.)

• Lubricant flow shifts piston D from right to left, dispensing piston D output through valve ports of

piston C and through outlet 3.

• Piston D shift directs lubricant through connecting passage to the left side of piston A (fig. 4).

• Lubricant flow against left side of piston A begins the second half cycle which shifts pistons from left

to right, dispensing lubricant through outlets 1, 8, 6 and 4 of the divider valve.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 44 45

Sin comentarios

Crossport Systems Pivio Manual de instrucciones Pagina 11