Crossport Systems Pivio Guía de usuario descargar pdf (Pagina 50)

Pivio Network Security System User’s Guide

Add the default route:

# route add -net default gw 172.30.192.1

Step 3 You will want to also update your startup files to set the correct

address on boot up. This is distribution dependent:

redhat

change the settings in /etc/sysconfig/network-scripts/

ifcfg-eth0

DEVICE=eth0

BOOTPROTO=static

BROADCAST=172.30.192.255

IPADDR=172.30.192.2

NETMASK=255.255.255.0

NETWORK=172.30.192.0

ONBOOT=yes

change /etc/sysconfig/network:

NETWORKING=yes

HOSTNAME=mylinuxbox

GATEWAY=172.30.192.1

debian

change the file /etc/init.d/network

#! /bin/sh

ifconfig lo 127.0.0.1

route add -net 127.0.0.0

IPADDR=172.30.192.2

NETMASK=255.255.255.0

NETWORK=172.30.192.0

BROADCAST=172.30.192.255

GATEWAY=172.30.192.1

ifconfig eth0 ${IPADDR} netmask ${NETMASK} broadcast ${BROADCAST}

Other Linux implementations may vary. Also you may need to

update /etc/hosts and /etc/networks depending on your

distribution.

Step 4 Set your DNS server to 172.30.192.1 (optional, but recommended).

edit /etc/resolv.conf and add a line that says:

nameserver 172.30.192.1

This is optional, but recommended. You should add it in, and then

remove it once the Pivio Firewall is fully configured.

Using Linux configured for DHCP

Under some conditions, you may want to configure Linux for DHCP. If you do

so with Red Hat Linux, you need to make sure that you manually provide a

domain server name. If you do not, Red Hat Linux will hang when it boots.

To provide a domain server name, edit /etc/resolv.conf and add a domain

name for your LAN.

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 59 60

Comentarios a estos manuales

Sin comentarios

Crossport Systems Pivio Guía de usuario Pagina 50

Comentarios a estos manuales

Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad Crossport Systems Pivio