Crossport Systems Pivio Especificaciones descargar pdf (Pagina 115)

Section Contents

10.7

BEST BY FARR

14 1/2" Closed Mouth Trailer-Mounted Bucking Unit

Technical Manual

PERIODIC INSPECTION AND MAINTENANCE

1. MAINTENANCE

A. Tong Torque Systems are built to give years of trouble-free service with minimum

maintenance. Periodic inspections of the load cell, and hydraulic lines and fittings, are

recommended in order to keep the system in top operating condition. A thorough inspec-

tion should be made at each rig-up.

B. Recharge hydraulic system with W15/16 fluid via the filling connection at the top of the

indicating gauge. Recharging must only be performed when there is no load on the load

cell.

Procedure:

1. Connect hand pump to filling connection on gauge.

2. Fill hand pump bowl with W15/16 hydraulic fluid and pump fluid into the system until

the piston rod on the load cell extends no more than 1/2” from the body.

3. Loosen vent screw on load cell body to permit trapped air to escape during loading.

MAINTAIN GREATER-THAN HALF FULL FLUID LEVEL IN THE

HAND PUMP BOWL TO AVOID PUMPING AIR INTO THE SYSTEM.

DO NOT ALLOW THE LEVEL TO FALL BELOW ONE-HALF FULL

4. Retighten load cell vent screw when the system has been adequately recharged

C. Load cell and indicator gauge should be returned to authorized repair facility for any

repairs or calibration required.

Torque Gauge Service Information

1 2 ... 110 111 112 113 114 115

Sin comentarios

Crossport Systems Pivio Especificaciones Pagina 115